A multi-component maintenance kit should be checked part by part. A handle, piston, spring, hopper gasket, and auger shaft seal serve different areas of a slush machine, so one matching component does not confirm the others. Use this checklist to compare every original part before choosing the FROZTIVA 10-Piece Maintenance Kit as a candidate.
Set Up a Reliable Comparison
- The removed original parts, cleaned and placed on a flat surface
- Clear photos of each original part and its installation position
- A caliper or accurate ruler suitable for the component size
- The machine brand and model for identification context
- Notes showing which component came from each machine area
Record each measurement separately. Do not combine measurements from different machines, bowls, or valve positions.
Component-by-Component Checklist
Hopper Gasket
Measure the opening across the center for the inside diameter. Measure the widest outside edge for the outside diameter. Place the gasket on a flat surface and measure its height without compressing it.
FROZTIVA candidate reference:
- Inside diameter: 165 mm / 6.50 in
- Outside diameter: 185 mm / 7.28 in
- Height: 15 mm / 0.59 in
Also compare the gasket profile, sealing edges, and installation position.
Auger Shaft Seal
Measure the center opening for the inside diameter, the widest outside edge for the outside diameter, and the full uncompressed height from the base to the highest point.
FROZTIVA candidate reference:
- Inside diameter: 12.7 mm / 0.50 in
- Outside diameter: 35.6 mm / 1.40 in
- Height: 21.7 mm / 0.85 in
Compare the complete profile and the way the seal sits around the shaft area.
Clear Valve Piston
Measure overall length from the lowest end to the highest point. Measure maximum outside diameter at the widest section, not at a narrower step.
FROZTIVA candidate reference:
- Overall length: 82.3 mm / 3.24 in
- Maximum outside diameter: 25.0 mm / 0.98 in
Compare the piston profile, top connection, stepped sections, and installation position.
Return Spring
Remove the spring and let it rest without compression. Measure from end to end for free length. Measure across the widest outside edges of the coil for maximum outside diameter.
FROZTIVA candidate reference:
- Free length: 94.5 mm / 3.72 in
- Maximum outside diameter: 22.1 mm / 0.87 in
Also compare the spring ends and seating position.
Dispenser Handle and Push Rod
No confirmed handle dimensions are available for this checklist. Compare the original handle by structure instead:
- Handle shape
- Pivot point
- Push-rod shape
- Mounting structure
- Installation position
Photograph the complete assembly before removal so the connection and orientation remain clear.
How to Compare the Results
Create one row for each component and record the original measurement beside the candidate reference. Mark profile and installation checks separately. A close visual resemblance is not enough when a dimension, connection, or mounting detail differs.
The 10-piece kit contains multiple service-part types. Treat each component as an independent check rather than assuming the entire set matches because one item looks similar.
Checklist Errors That Can Change the Result
- Measuring across the wrong gasket edge
- Compressing a gasket or seal while measuring height
- Measuring a spring while it is installed or compressed
- Measuring a narrow piston step instead of maximum outside diameter
- Comparing a handle without checking its pivot and push-rod connection
- Mixing measurements from different machine positions
Stop and Gather More Evidence If
Pause if you cannot identify the machine area, original component, profile, installation position, or required measurements. Take additional photos and record the machine brand and model for identification support.
Choose the Narrowest Candidate for the Job
The individual FROZTIVA hopper gasket, auger shaft seal, dispenser handle kit, and valve piston-and-spring kit are related candidates for customers who need fewer component types. Each still requires an independent comparison.
Send the Evidence for Identification
Compare all components before ordering, or use Find Your Parts to send the machine details, original-part photos, installation-position photos, and measurements.